RegExp Studio
TRegExpr v.0.952 - Delphi Regular Expressions

Bulgarian
English
French
German
Russian
Spanish
About TRegExpr About What's new What's new Installation Installation Regular Expressions Syntax Syntax What's new Interface What's new FAQ TRegExpr usage demos Demos AnSo@Web Author  
Syntax of Regular Expressions
Important note
Below is the description of regular expressions implemented in freeware library TRegExpr. Please note, that the library widely used in many free and commertial software products. The author of TRegExpr library cannot answer direct questions from this products' users. Please, send Your questions to the product's support first.

Introduction


Regular Expressions are a widely-used method of specifying patterns of text to search for. Special metacharacters allow You to specify, for instance, that a particular string You are looking for occurs at the beginning or end of a line, or contains n recurrences of a certain character.

Regular expressions look ugly for novices, but really they are very simple (well, usually simple ;) ), handly and powerfull tool.

I recommend You to play with regular expressions using RegExp Studio - it'll help You to uderstand main conceptions. Moreover, there are many predefined examples with comments included into repository of R.e. visual debugger.

Let's start our learning trip!


Simple matches

Any single character matches itself, unless it is a metacharacter with a special meaning described below.

A series of characters matches that series of characters in the target string, so the pattern "bluh" would match "bluh'' in the target string. Quite simple, eh ?

You can cause characters that normally function as metacharacters or escape sequences to be interpreted literally by 'escaping' them by preceding them with a backslash "\", for instance: metacharacter "^" match beginning of string, but "\^" match character "^", "\\" match "\" and so on.

Examples:
  foobar          matchs string 'foobar'
  \^FooBarPtr     matchs '^FooBarPtr'

Note for C++ Builder users
Please, read in FAQ answer on question Why many r.e. work wrong in Borland C++ Builder?

Escape sequences


Characters may be specified using a escape sequences syntax much like that used in C and Perl: "\n'' matches a newline, "\t'' a tab, etc. More generally, \xnn, where nn is a string of hexadecimal digits, matches the character whose ASCII value is nn. If You need wide (Unicode) character code, You can use '\x{nnnn}', where 'nnnn' - one or more hexadecimal digits.

  \xnn     char with hex code nn
  \x{nnnn} char with hex code nnnn (one byte for plain text and two bytes for Unicode)
  \t       tab (HT/TAB), same as \x09
  \n       newline (NL), same as \x0a
  \r       car.return (CR), same as \x0d
  \f       form feed (FF), same as \x0c
  \a       alarm (bell) (BEL), same as \x07
  \e       escape (ESC), same as \x1b

Examples:
  foo\x20bar   matchs 'foo bar' (note space in the middle)
  \tfoobar     matchs 'foobar' predefined by tab


Character classes

You can specify a character class, by enclosing a list of characters in [], which will match any one character from the list.

If the first character after the "['' is "^'', the class matches any character not in the list.

Examples:
  foob[aeiou]r   finds strings 'foobar', 'foober' etc. but not 'foobbr', 'foobcr' etc.
  foob[^aeiou]r  find strings 'foobbr', 'foobcr' etc. but not 'foobar', 'foober' etc.

Within a list, the "-'' character is used to specify a range, so that a-z represents all characters between "a'' and "z'', inclusive.

If You want "-'' itself to be a member of a class, put it at the start or end of the list, or escape it with a backslash. If You want ']' you may place it at the start of list or escape it with a backslash.

Examples:
  [-az]      matchs 'a', 'z' and '-'
  [az-]      matchs 'a', 'z' and '-'
  [a\-z]     matchs 'a', 'z' and '-'
  [a-z]      matchs all twenty six small characters from 'a' to 'z'
  [\n-\x0D]  matchs any of #10,#11,#12,#13.
  [\d-t]     matchs any digit, '-' or 't'.
  []-a]      matchs any char from ']'..'a'.


Metacharacters

Metacharacters are special characters which are the essence of Regular Expressions. There are different types of metacharacters, described below.


Metacharacters - line separators


  ^      start of line
  $      end of line
  \A     start of text
  \Z     end of text
  .      any character in line

Examples:
  ^foobar     matchs string 'foobar' only if it's at the beginning of line
  foobar$     matchs string 'foobar' only if it's at the end of line
  ^foobar$    matchs string 'foobar' only if it's the only string in line
  foob.r      matchs strings like 'foobar', 'foobbr', 'foob1r' and so on

The "^" metacharacter by default is only guaranteed to match at the beginning of the input string/text, the "$" metacharacter only at the end. Embedded line separators will not be matched by "^'' or "$''.
You may, however, wish to treat a string as a multi-line buffer, such that the "^'' will match after any line separator within the string, and "$'' will match before any line separator. You can do this by switching On the modifier /m.
The \A and \Z are just like "^'' and "$'', except that they won't match multiple times when the modifier /m is used, while "^'' and "$'' will match at every internal line separator.


The ".'' metacharacter by default matches any character, but if You switch Off the modifier /s, then '.' won't match embedded line separators.

TRegExpr works with line separators as recommended at www.unicode.org ( http://www.unicode.org/unicode/reports/tr18/ ):

"^" is at the beginning of a input string, and, if modifier /m is On, also immediately following any occurrence of \x0D\x0A or \x0A or \x0D (if You are using Unicode version of TRegExpr, then also \x2028 or \x2029 or \x0B or \x0C or \x85). Note that there is no empty line within the sequence \x0D\x0A.

"$" is at the end of a input string, and, if modifier /m is On, also immediately preceding any occurrence of \x0D\x0A or \x0A or \x0D (if You are using Unicode version of TRegExpr, then also \x2028 or \x2029 or \x0B or \x0C or \x85). Note that there is no empty line within the sequence \x0D\x0A.

"." matchs any character, but if You switch Off modifier /s then "." doesn't match \x0D\x0A and \x0A and \x0D (if You are using Unicode version of TRegExpr, then also \x2028 and \x2029 and \x0B and \x0C and \x85).

Note that "^.*$" (an empty line pattern) doesnot match the empty string within the sequence \x0D\x0A, but matchs the empty string within the sequence \x0A\x0D.

Multiline processing can be easely tuned for Your own purpose with help of TRegExpr properties LineSeparators and LinePairedSeparator, You can use only Unix style separators \n or only DOS/Windows style \r\n or mix them together (as described above and used by default) or define Your own line separators!


Metacharacters - predefined classes


  \w     an alphanumeric character (including "_")
  \W     a nonalphanumeric
  \d     a numeric character
  \D     a non-numeric
  \s     any space (same as [ \t\n\r\f])
  \S     a non space

You may use \w, \d and \s within custom character classes.

Examples:
  foob\dr     matchs strings like 'foob1r', ''foob6r' and so on but not 'foobar', 'foobbr' and so on
  foob[\w\s]r matchs strings like 'foobar', 'foob r', 'foobbr' and so on but not 'foob1r', 'foob=r' and so on

TRegExpr uses properties SpaceChars and WordChars to define character classes \w, \W, \s, \S, so You can easely redefine it.


Metacharacters - word boundaries


  \b     Match a word boundary
  \B     Match a non-(word boundary)

A word boundary (\b) is a spot between two characters that has a \w on one side of it and a \W on the other side of it (in either order), counting the imaginary characters off the beginning and end of the string as matching a \W.


Metacharacters - iterators


Any item of a regular expression may be followed by another type of metacharacters - iterators. Using this metacharacters You can specify number of occurences of previous character, metacharacter or subexpression.

  *      zero or more ("greedy"), similar to {0,}
  +      one or more ("greedy"), similar to {1,}
  ?      zero or one ("greedy"), similar to {0,1}
  {n}    exactly n times ("greedy")
  {n,}   at least n times ("greedy")
  {n,m}  at least n but not more than m times ("greedy")
  *?     zero or more ("non-greedy"), similar to {0,}?
  +?     one or more ("non-greedy"), similar to {1,}?
  ??     zero or one ("non-greedy"), similar to {0,1}?
  {n}?   exactly n times ("non-greedy")
  {n,}?  at least n times ("non-greedy")
  {n,m}? at least n but not more than m times ("non-greedy")

So, digits in curly brackets of the form {n,m}, specify the minimum number of times to match the item n and the maximum m. The form {n} is equivalent to {n,n} and matches exactly n times. The form {n,} matches n or more times. There is no limit to the size of n or m, but large numbers will chew up more memory and slow down r.e. execution.

If a curly bracket occurs in any other context, it is treated as a regular character.

Examples:
  foob.*r     matchs strings like 'foobar', 'foobalkjdflkj9r' and 'foobr'
  foob.+r     matchs strings like 'foobar', 'foobalkjdflkj9r' but not 'foobr'
  foob.?r     matchs strings like 'foobar', 'foobbr' and 'foobr' but not 'foobalkj9r'
  fooba{2}r   matchs the string 'foobaar'
  fooba{2,}r  matchs strings like 'foobaar', 'foobaaar', 'foobaaaar' etc.
  fooba{2,3}r matchs strings like 'foobaar', or 'foobaaar' but not 'foobaaaar'

A little explanation about "greediness". "Greedy" takes as many as possible, "non-greedy" takes as few as possible. For example, 'b+' and 'b*' applied to string 'abbbbc' return 'bbbb', 'b+?' returns 'b', 'b*?' returns empty string, 'b{2,3}?' returns 'bb', 'b{2,3}' returns 'bbb'.

You can switch all iterators into "non-greedy" mode (see the modifier /g).


Metacharacters - alternatives

You can specify a series of alternatives for a pattern using "|'' to separate them, so that fee|fie|foe will match any of "fee'', "fie'', or "foe'' in the target string (as would f(e|i|o)e). The first alternative includes everything from the last pattern delimiter ("('', "['', or the beginning of the pattern) up to the first "|'', and the last alternative contains everything from the last "|'' to the next pattern delimiter. For this reason, it's common practice to include alternatives in parentheses, to minimize confusion about where they start and end.
Alternatives are tried from left to right, so the first alternative found for which the entire expression matches, is the one that is chosen. This means that alternatives are not necessarily greedy. For example: when matching foo|foot against "barefoot'', only the "foo'' part will match, as that is the first alternative tried, and it successfully matches the target string. (This might not seem important, but it is important when you are capturing matched text using parentheses.)
Also remember that "|'' is interpreted as a literal within square brackets, so if You write [fee|fie|foe] You're really only matching [feio|].

Examples:
  foo(bar|foo)  matchs strings 'foobar' or 'foofoo'.


Metacharacters - subexpressions

The bracketing construct ( ... ) may also be used for define r.e. subexpressions (after parsing You can find subexpression positions, lengths and actual values in MatchPos, MatchLen and Match properties of TRegExpr, and substitute it in template strings by TRegExpr.Substitute).

Subexpressions are numbered based on the left to right order of their opening parenthesis.
First subexpression has number '1' (whole r.e. match has number '0' - You can substitute it in TRegExpr.Substitute as '$0' or '$&').

Examples:
  (foobar){8,10}  matchs strings which contain 8, 9 or 10 instances of the 'foobar'
  foob([0-9]|a+)r matchs 'foob0r', 'foob1r' , 'foobar', 'foobaar', 'foobaar' etc.


Metacharacters - backreferences

Metacharacters \1 through \9 are interpreted as backreferences. \<n> matches previously matched subexpression #<n>.

Examples:
  (.)\1+         matchs 'aaaa' and 'cc'.
  (.+)\1+        also match 'abab' and '123123'
  (['"]?)(\d+)\1 matchs '"13" (in double quotes), or '4' (in single quotes) or 77 (without quotes) etc


Modifiers

 
Modifiers are for changing behaviour of TRegExpr.

There are many ways to set up modifiers.
Any of these modifiers may be embedded within the regular expression itself using the (?...) construct.
Also, You can assign to appropriate TRegExpr properties (ModifierX for example to change /x, or ModifierStr to change all modifiers together). The default values for new instances of TRegExpr object defined in global variables, for example global variable RegExprModifierX defines value of new TRegExpr instance ModifierX property.

i
Do case-insensitive pattern matching (using installed in you system locale settings), see also InvertCase.  
m
Treat string as multiple lines. That is, change "^'' and "$'' from matching at only the very start or end of the string to the start or end of any line anywhere within the string, see also Line separators.  
s
Treat string as single line. That is, change ".'' to match any character whatsoever, even a line separators (see also Line separators), which it normally would not match.  
g
Non standard modifier. Switching it Off You'll switch all following operators into non-greedy mode (by default this modifier is On). So, if modifier /g is Off then '+' works as '+?', '*' as '*?' and so on  
x
Extend your pattern's legibility by permitting whitespace and comments (see explanation below).  
r
Non-standard modifier. If is set then range à-ÿ additional include russian letter '¸', À-ß additional include '¨', and à-ß include all russian symbols.  
Sorry for foreign users, but it's set by default. If you want switch if off by default - set false to global variable RegExprModifierR.  
 
 
The modifier /x itself needs a little more explanation. It tells the TRegExpr to ignore whitespace that is neither backslashed nor within a character class. You can use this to break up your regular expression into (slightly) more readable parts. The # character is also treated as a metacharacter introducing a comment, for example:

(   
(abc) # comment 1  
  |   # You can use spaces to format r.e. - TRegExpr ignores it  
(efg) # comment 2  
)  

This also means that if you want real whitespace or # characters in the pattern (outside a character class, where they are unaffected by /x), that you'll either have to escape them or encode them using octal or hex escapes. Taken together, these features go a long way towards making regular expressions text more readable.
 
 
Perl extensions

(?imsxr-imsxr)
You may use it into r.e. for modifying modifiers by the fly. If this construction inlined into subexpression, then it effects only into this subexpression

Examples:
  (?i)Saint-Petersburg       matchs 'Saint-petersburg' and 'Saint-Petersburg'
  (?i)Saint-(?-i)Petersburg  matchs 'Saint-Petersburg' but not 'Saint-petersburg'
  (?i)(Saint-)?Petersburg    matchs 'Saint-petersburg' and 'saint-petersburg'
  ((?i)Saint-)?Petersburg    matchs 'saint-Petersburg', but not 'saint-petersburg'


(?#text)
A comment, the text is ignored. Note that TRegExpr closes the comment as soon as it sees a ")", so there is no way to put a literal ")" in the comment.


Internal mechanism explanation


It seems You need some internal secrets of TRegExpr?
Well, it's under constraction, please wait some time..
Just now don't forget to read the FAQ (expecially 'non-greediness' optimization question).


© 2004 Andrey V. Sorokin, Saint Petersburg, Russia
anso@mail.ru
RegExpStudio.com

Help&Manual - the best help authoring tool!